Module Package description
OpenBLAS/0.2.14 OpenBLAS is a package for Computation Linear Algebra. Visit the OpenBLAS web site at http://www.openblas.net/ for more information. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
esmf This module makes ESMF libraries available for loading but does not load any of the libraries. After loading this module, run module av to see which ESMF libraries are available for loading, then load as needed. See http://www.earthsystemmodeling.org/ for more information.
fftw3-mpi/3.3.6 This module loads the FFTW 3.3.6 package with MPI. INC_NCAR: Will add the correct include path flags for the FFTW headers and modulefiles. LIB_NCAR: Will add the correct link and rpath commands to use the FFTW shared libraries in your programs. Also see https://www2.cisl.ucar.edu/cisl-support for information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
gdal/1.10.0 GDAL (Geospatial Data Abstraction Library) is a translator library for raster geospatial data formats that is released under an X/MIT style Open Source license by the Open Source Geospatial Foundation. As a library, it presents a single abstract data model to the calling application for all supported formats. It also comes with a variety of useful command line utilities for data translation and processing. This module loads the GDAL 1.10.0 package for C and C++. It will place the GDAL executables (for example, gdalinfo, gdal_translate) in your path. Loading this module helps you link the related library automatically during compiling and linking steps. Visit the GDAL web site at http://www.gdal.org/ for more information. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
gdal/1.10.0-broken GDAL (Geospatial Data Abstraction Library) is a translator library for raster geospatial data formats that is released under an X/MIT style Open Source license by the Open Source Geospatial Foundation. As a library, it presents a single abstract data model to the calling application for all supported formats. It also comes with a variety of useful command line utilities for data translation and processing. This module loads the GDAL 1.10.0 package for C and C++. It will place the GDAL executables (for example, gdalinfo, gdal_translate) in your path. Loading this module helps you link the related library automatically during compiling and linking steps. Visit the GDAL web site at http://www.gdal.org/ for more information. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
gdal/1.11.4 GDAL (Geospatial Data Abstraction Library) is a translator library for raster geospatial data formats that is released under an X/MIT style Open Source license by the Open Source Geospatial Foundation. As a library, it presents a single abstract data model to the calling application for all supported formats. It also comes with a variety of useful command line utilities for data translation and processing. This module loads the GDAL 1.11.4 package for C and C++. It will place the GDAL executables (for example, gdalinfo, gdal_translate) in your path. Loading this module helps you link the related library automatically during compiling and linking steps. Visit the GDAL web site at http://www.gdal.org/ for more information. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
gdal/2.0.1 GDAL (Geospatial Data Abstraction Library) is a translator library for raster geospatial data formats that is released under an X/MIT style Open Source license by the Open Source Geospatial Foundation. As a library, it presents a single abstract data model to the calling application for all supported formats. It also comes with a variety of useful command line utilities for data translation and processing. This module loads the GDAL 2.0.1 package for C and C++. It will place the GDAL executables (for example, gdalinfo, gdal_translate) in your path. Loading this module helps you link the related library automatically during compiling and linking steps. Visit the GDAL web site at http://www.gdal.org/ for more information. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
gdal/2.0.2 GDAL (Geospatial Data Abstraction Library) is a translator library for raster geospatial data formats that is released under an X/MIT style Open Source license by the Open Source Geospatial Foundation. As a library, it presents a single abstract data model to the calling application for all supported formats. It also comes with a variety of useful command line utilities for data translation and processing. This module loads the GDAL 2.0.2 package for C and C++. It will place the GDAL executables (for example, gdalinfo, gdal_translate) in your path. Loading this module helps you link the related library automatically during compiling and linking steps. Visit the GDAL web site at http://www.gdal.org/ for more information. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
gdal/2.0.3 GDAL This module loads the GDAL package for Fortran, python, C, and C++. It will place the GDAL executables in your path, and update the environment variable "GDAL" to the GDAL installation directory. Loading this module helps you automatically link the related library during compiling and linking steps. This module also loads the NetCDF 4.4.0 package for Fortran, C, and C++. It will place the NetCDF executables (e.g., nc-config) in your path, and update the environment variable "NETCDF" to the NetCDF installation directory. To search manual pages for GDAL commands, type the "apropos gdal" command. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
gdal/2.1.3 GDAL This module loads the GDAL package for Fortran, python, C, and C++. It will place the GDAL executables in your path, and update the environment variable "GDAL" to the GDAL installation directory. Loading this module helps you automatically link the related library during compiling and linking steps. To search manual pages for GDAL commands, type the "apropos gdal" command. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
grass/7.0.3 GRASS GIS, commonly referred to as GRASS (Geographic Resources Analysis Support System), is a free and open source Geographic Information System (GIS) software suite used for geospatial data management and analysis, image processing, graphics and maps production, spatial modeling, and visualization. GRASS GIS is currently used in academic and commercial settings around the world, as well as by many governmental agencies and environmental consulting companies. This module loads the GRASS GIS 7.0.3 package. It will place the GRASS executable (grass70) in your path. You may want to run GRASS GIS from within a remote VNC session for better performance. Loading this module helps you link the related library automatically during compiling and linking steps. Visit the GRASS GIS web site at https://grass.osgeo.org/ for more information. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
hdf5-mpi/1.8.11 This module loads the HDF5 1.8.11 package with MPI. It will place the HDF5 executables in your PATH, and also update the environment variables: INC_NCAR: Will add the correct include path flags for the HDF5 headers and module files. LIB_NCAR: Will add the correct link and rpath commands to use the HDF5 shared libraries in your programs. See http://www.hdfgroup.org/HDF5/ for details.
hdf5-mpi/1.8.14 This module loads the HDF5 1.8.14 package with MPI. It will place the HDF5 executables in your PATH, and also update the environment variables: INC_NCAR: Will add the correct include path flags for the HDF5 headers and module files. LIB_NCAR: Will add the correct link and rpath commands to use the HDF5 shared libraries in your programs. See http://www.hdfgroup.org/HDF5/ for details.
hdf5-mpi/1.8.16 This module loads the HDF5 1.8.16 package with MPI. It will place the HDF5 executables in your PATH, and also update the environment variables: INC_NCAR: Will add the correct include path flags for the HDF5 headers and module files. LIB_NCAR: Will add the correct link and rpath commands to use the HDF5 shared libraries in your programs. See http://www.hdfgroup.org/HDF5/ for details.
hdf5-mpi/1.8.9 This module loads the HDF5 1.8.9 package with MPI. It will place the HDF5 executables in your PATH, and also update the environment variables: INC_NCAR: Will add the correct include path flags for the HDF5 headers and module files. LIB_NCAR: Will add the correct link and rpath commands to use the HDF5 shared libraries in your programs. See http://www.hdfgroup.org/HDF5/ for details.
hdf5/1.10.1 hdf5 1.10.1 google it
hdf5/1.8.11 This module loads the HDF5 1.8.11 package. It will place the HDF5 executables in your PATH, and also update the environment variables: INC_NCAR: Will add the correct include path flags for the HDF5 headers and module files. LIB_NCAR: Will add the correct link and rpath commands to use the HDF5 shared libraries in your programs. See http://www.hdfgroup.org/HDF5/ for details.
hdf5/1.8.16 This module loads the HDF5 1.8.16 package. It will place the HDF5 executables in your PATH, and also update the environment variables: INC_NCAR: Will add the correct include path flags for the HDF5 headers and module files. LIB_NCAR: Will add the correct link and rpath commands to use the HDF5 shared libraries in your programs. See http://www.hdfgroup.org/HDF5/ for details.
hdf5/1.8.9 This module loads the HDF5 1.8.9 package. It will place the HDF5 executables in your PATH, and also update the environment variables: INC_NCAR: Will add the correct include path flags for the HDF5 headers and module files. LIB_NCAR: Will add the correct link and rpath commands to use the HDF5 shared libraries in your programs. See http://www.hdfgroup.org/HDF5/ for details.
lapack/3.7.0 LAPACK libraries. WARNING: this build has not been optimized for yellowstone. Usage of MKL is instead recommended. See http://www.netlib.org/lapack/ for details.
ncarcompilers/1.0 This module loads compiler wrappers to intercept the compiler invocation and insert INC_NCAR and LIB_NCAR, so that by default: 1. Header files are found for loaded libraries. 2. Libraries are included appropriately in link commands. 3. RPATH is set into binaries, so there is no need to set LD_LIBRARY_PATH.
ncl/6.0.0 This module loads the NCL Version 6.0.0 package compiled with the GNU compiler.
ncl/6.1.0 This module loads the NCL Version 6.1.0 package, compiled with the GNU compiler.
ncl/6.1.2 This module loads the NCL Version 6.1.2 package, compiled with the GNU compiler.
ncl/6.2.0 This module loads the NCL Version 6.2.0 package, compiled with the GNU compiler.
ncl/6.2.1 This module loads the NCL Version 6.2.1 package, compiled with the GNU compiler.
ncl/6.3.0 This module loads the NCL Version 6.3.0 package, compiled with the GNU compiler.
ncl/6.4.0 This module loads the NCL Version 6.4.0 package, compiled with the GNU compiler.
netcdf-mpi/4.2 This module loads the NetCDF 4.2 package with MPI. It will place the NetCDF executables in your PATH, and also update these environment variables: INC_NCAR: Will add the correct include path flags for the NetCDF headers and modulefiles. LIB_NCAR: Will add the correct link and rpath commands to use the NetCDF shared libraries in your programs. To search manual pages for NetCDF commands, type the "apropos netcdf" command. To read manual pages for NetCDF commands, type the "man " command. Visit the Unidata web site at http://www.unidata.ucar.edu/software/netcdf/ for more information. Also see https://www2.cisl.ucar.edu/cisl-support for information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
netcdf-mpi/4.3.3.1 This module loads the NetCDF 4.3.3.1 package with MPI. It will place the NetCDF executables in your PATH, and also update these environment variables: INC_NCAR: Will add the correct include path flags for the NetCDF headers and modulefiles. LIB_NCAR: Will add the correct link and rpath commands to use the NetCDF shared libraries in your programs. To search manual pages for NetCDF commands, type the "apropos netcdf" command. To read manual pages for NetCDF commands, type the "man " command. Visit the Unidata web site at http://www.unidata.ucar.edu/software/netcdf/ for more information. Also see https://www2.cisl.ucar.edu/cisl-support for information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
netcdf-mpi/4.4.0 This module loads the NetCDF 4.4.0 package with MPI. It will place the NetCDF executables in your PATH, and also update these environment variables: INC_NCAR: Will add the correct include path flags for the NetCDF headers and modulefiles. LIB_NCAR: Will add the correct link and rpath commands to use the NetCDF shared libraries in your programs. To search manual pages for NetCDF commands, type the "apropos netcdf" command. To read manual pages for NetCDF commands, type the "man " command. Visit the Unidata web site at http://www.unidata.ucar.edu/software/netcdf/ for more information. Also see https://www2.cisl.ucar.edu/cisl-support for information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
netcdf-mpi/4.4.1 This module loads the NetCDF 4.4.1 package with MPI. It will place the NetCDF executables in your PATH, and also update these environment variables: INC_NCAR: Will add the correct include path flags for the NetCDF headers and modulefiles. LIB_NCAR: Will add the correct link and rpath commands to use the NetCDF shared libraries in your programs. To search manual pages for NetCDF commands, type the "apropos netcdf" command. To read manual pages for NetCDF commands, type the "man " command. Visit the Unidata web site at http://www.unidata.ucar.edu/software/netcdf/ for more information. Also see https://www2.cisl.ucar.edu/cisl-support for information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
netcdf-mpi/4.5.0 NetCDF is a set of software libraries and self-describing, machine-independent data formats that support the creation, access, and sharing of array-oriented scientific data. This module loads the parallel NetCDF interfaces for C (v4.5.0), Fortran (v4.4.4), and C++ (v4.3.0). Software website - http://www.unidata.ucar.edu/software/netcdf/ Built on Fri Dec 15 16:50:46 MST 2017 Modules used: ncarenv/1.0 ncarbinlibs/1.1 gnu/6.1.0 openmpi-slurm/3.0.0
netcdf/4.3.0 NetCDF (Network Common Data Form) is a set of software libraries and self-describing, machine-independent data formats that support the creation, access, and sharing of array-oriented scientific data. This module loads the NetCDF 4.3.0 package for Fortran, C, and C++. It will place the NetCDF executables (e.g., nc-config) in your path, and update the environment variable "NETCDF" to the NetCDF installation directory. Loading this module helps you automatically link the related library during compiling and linking steps. To search manual pages for NetCDF commands, type the "apropos netcdf" command. To read manual pages for NetCDF commands, type the "man " command. Visit the Unidata web site at http://www.unidata.ucar.edu/software/netcdf/ for more information about NetCDF. Visit the CISL web site at https://www2.cisl.ucar.edu/cisl-support for more information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
netcdf/4.3.3.1 NetCDF (Network Common Data Form) is a set of software libraries and self-describing, machine-independent data formats that support the creation, access, and sharing of array-oriented scientific data. This module loads the NetCDF 4.3.3.1 package for Fortran, C, and C++. It will place the NetCDF executables (e.g., nc-config) in your path, and update the environment variable "NETCDF" to the NetCDF installation directory. Loading this module helps you automatically link the related library during compiling and linking steps. To search manual pages for NetCDF commands, type the "apropos netcdf" command. To read manual pages for NetCDF commands, type the "man " command. Visit the Unidata web site at http://www.unidata.ucar.edu/software/netcdf/ for more information about NetCDF. Visit the CISL web site at https://www2.cisl.ucar.edu/cisl-support for more information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
netcdf/4.4.0 NetCDF (Network Common Data Form) is a set of software libraries and self-describing, machine-independent data formats that support the creation, access, and sharing of array-oriented scientific data. This module loads the NetCDF 4.4.0 package for Fortran, C, and C++. It will place the NetCDF executables (e.g., nc-config) in your path, and update the environment variable "NETCDF" to the NetCDF installation directory. Loading this module helps you automatically link the related library during compiling and linking steps. To search manual pages for NetCDF commands, type the "apropos netcdf" command. To read manual pages for NetCDF commands, type the "man " command. Visit the Unidata web site at http://www.unidata.ucar.edu/software/netcdf/ for more information about NetCDF. Visit the CISL web site at https://www2.cisl.ucar.edu/cisl-support for more information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
netcdf/4.4.1 NetCDF (Network Common Data Form) is a set of software libraries and self-describing, machine-independent data formats that support the creation, access, and sharing of array-oriented scientific data. This module loads the NetCDF package for Fortran, C, and C++. It will place the NetCDF executables (e.g., nc-config) in your path, and update the environment variable "NETCDF" to the NetCDF installation directory. Loading this module helps you automatically link the related library during compiling and linking steps. To search manual pages for NetCDF commands, type the "apropos netcdf" command. To read manual pages for NetCDF commands, type the "man " command. Visit the Unidata web site at http://www.unidata.ucar.edu/software/netcdf/ for more information about NetCDF. Visit the CISL web site at https://www2.cisl.ucar.edu/cisl-support for more information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
netcdf/4.5.0 NetCDF is a set of software libraries and self-describing, machine-independent data formats that support the creation, access, and sharing of array-oriented scientific data. This module loads the serial NetCDF interfaces for C (v4.5.0), Fortran (v4.4.4), and C++ (v4.3.0). Software website - http://www.unidata.ucar.edu/software/netcdf/ Built on Fri Dec 15 14:26:20 MST 2017 Modules used: ncarenv/1.0 ncarbinlibs/1.1 gnu/6.1.0
nv/0.0 This module loads the NV 0.0 package. It will place the NV executables in your PATH, and also update the environment variables: NV_DATA: - Will add the correct include path flags for the NV headers and module files NV_LIBS: - Will add the correct link and rpath commands to use the NV shared libraries in your programs
pFUnit-mpi/1.0 This module loads the pFUnit-mpi 1.0 package. It will update these environment variables: INC_NCAR: Will add the correct include path flags for the pFUnit-mpi module files. LIB_NCAR: Will add the correct link and rpath commands to use the pFUnit-mpi shared libraries in your programs. See http://sourceforge.net/projects/pfunit/ for details.
pFUnit/1.0 This module loads the pFUnit 1.0 package. It will update these environment variables: INC_NCAR: Will add the correct include path flags for the pFUnit module files. LIB_NCAR: Will add the correct link and rpath commands to use the pFUnit shared libraries in your programs. See http://sourceforge.net/projects/pfunit/ for details.
php/5.5.7 PhP is an interpreted language used primarily for developing Web-based applications. See http://us1.php.net for more information. Visit the CISL web site at https://www2.cisl.ucar.edu/cisl-support for more information about CISL resources. If you have questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
pnetcdf/1.3.0 This module loads the pNetCDF Version 1.3.0 package. It will place the pNetCDF executables in your PATH, and also update these environment variables: INC_NCAR: Will add the correct include path flags for the pNetCDF headers and modulefiles. LIB_NCAR: Will add the correct link and rpath commands to use the pNetCDF shared libraries in your programs. See http://trac.mcs.anl.gov/projects/parallel-netcdf/ for details.
pnetcdf/1.3.1 This module loads the pNetCDF Version 1.3.1 package. It will place the pNetCDF executables in your PATH, and also update these environment variables: INC_NCAR: Will add the correct include path flags for the pNetCDF headers and modulefiles. LIB_NCAR: Will add the correct link and rpath commands to use the pNetCDF shared libraries in your programs. See http://trac.mcs.anl.gov/projects/parallel-netcdf/ for details.
pnetcdf/1.4.1 This module loads the pNetCDF Version 1.4.1 package. It will place the pNetCDF executables in your PATH, and also update these environment variables: INC_NCAR: Will add the correct include path flags for the pNetCDF headers and modulefiles. LIB_NCAR: Will add the correct link and rpath commands to use the pNetCDF shared libraries in your programs. See http://trac.mcs.anl.gov/projects/parallel-netcdf/ for details.
pnetcdf/1.6.0 This module loads the pNetCDF Version 1.6.0 package. It will place the pNetCDF executables in your PATH, and also update these environment variables: INC_NCAR: Will add the correct include path flags for the pNetCDF headers and modulefiles. LIB_NCAR: Will add the correct link and rpath commands to use the pNetCDF shared libraries in your programs. See http://trac.mcs.anl.gov/projects/parallel-netcdf/ for details.
pnetcdf/1.6.1 This module loads the pNetCDF Version 1.6.1 package. It will place the pNetCDF executables in your PATH, and also update these environment variables: INC_NCAR: Will add the correct include path flags for the pNetCDF headers and modulefiles. LIB_NCAR: Will add the correct link and rpath commands to use the pNetCDF shared libraries in your programs. See http://trac.mcs.anl.gov/projects/parallel-netcdf/ for details.
pnetcdf/1.7.0 This module loads the pNetCDF Version 1.7.0 package. It will place the pNetCDF executables in your PATH, and also update these environment variables: INC_NCAR: Will add the correct include path flags for the pNetCDF headers and modulefiles. LIB_NCAR: Will add the correct link and rpath commands to use the pNetCDF shared libraries in your programs. See http://trac.mcs.anl.gov/projects/parallel-netcdf/ for details.
proj/4.8.0 PROJ.4 (Cartographic Projections Library) is a set of utilities and API for cartographic projection. This module loads the PROJ 4.8.0 package for Fortran, C, and C++. It will place proj executables (including proj) in your path. Loading this module helps you link the related library automatically during compiling and linking steps. To search manual pages for PROJ commands, enter the "apropos proj" command. To read manual pages for PROJ commands, enter the "man " command. Visit the PROJ web site at http://trac.osgeo.org/proj/ for more information. Also see https://www2.cisl.ucar.edu/cisl-support for information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
proj/4.9.2 PROJ.4 (Cartographic Projections Library) is a set of utilities and API for cartographic projection. This module loads the PROJ 4.9.2 package for Fortran, C, and C++. It will place proj executables (including proj) in your path. Loading this module helps you link the related library automatically during compiling and linking steps. To search manual pages for PROJ commands, enter the "apropos proj" command. To read manual pages for PROJ commands, enter the "man " command. Visit the PROJ web site at http://trac.osgeo.org/proj/ for more information. Also see https://www2.cisl.ucar.edu/cisl-support for information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
vtk/7.0.0 The Visualization Toolkit (VTK) is an open-source, freely available software system for 3D computer graphics, image processing and visualization. VTK consists of a C++ class library and several interpreted interface layers including Tcl/Tk, Java, and Python though in this version, only Python is wrapped. This module loads the VTK 7.0.0 package. Loading this module helps you automatically link the related library during compiling and linking steps. Visit the VTK web site at http://www.vtk.org/Wiki/VTK_Documentation for more information about VTK. Visit the CISL web site at https://www2.cisl.ucar.edu/cisl-support for more information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
vtk/7.0.0.openmp The Visualization Toolkit (VTK) is an open-source, freely available software system for 3D computer graphics, image processing and visualization. VTK consists of a C++ class library and several interpreted interface layers including Tcl/Tk, Java, and Python though in this version, only Python is wrapped. This module loads the VTK 7.0.0 package. Loading this module helps you automatically link the related library during compiling and linking steps. Visit the VTK web site at http://www.vtk.org/Wiki/VTK_Documentation for more information about VTK. Visit the CISL web site at https://www2.cisl.ucar.edu/cisl-support for more information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
vtk/7.1.0.openmp The Visualization Toolkit (VTK) is an open-source, freely available software system for 3D computer graphics, image processing and visualization. VTK consists of a C++ class library and several interpreted interface layers including Tcl/Tk, Java, and Python though in this version, only Python is wrapped. Uses mpi and openmp. This module loads the VTK 7.0.0 package. Loading this module helps you automatically link the related library during compiling and linking steps. Visit the VTK web site at http://www.vtk.org/Wiki/VTK_Documentation for more information about VTK. Visit the CISL web site at https://www2.cisl.ucar.edu/cisl-support for more information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).
vtk/7.1.0.openmpi_mpi The Visualization Toolkit (VTK) is an open-source, freely available software system for 3D computer graphics, image processing and visualization. VTK consists of a C++ class library and several interpreted interface layers including Tcl/Tk, Java, and Python though in this version, only Python is wrapped. Uses mpi and openmp. This module loads the VTK 7.0.0 package. Loading this module helps you automatically link the related library during compiling and linking steps. Visit the VTK web site at http://www.vtk.org/Wiki/VTK_Documentation for more information about VTK. Visit the CISL web site at https://www2.cisl.ucar.edu/cisl-support for more information about CISL resources. If you have any questions or concerns about the module utility, contact the CISL Consulting Services Group by email (cislhelp@ucar.edu) or by phone (303-497-2400).